Cable Connections - Barco MDCG-5221 User Manual

2. Installation
W
ARNING
Store the foot lock clip in the storage hole in case the display needs to be transported
later.
Image 2-3
If, after installing the display of the system, you change the panel orientation while an
image is on the screen, the result depends on the graphic board and the resolution of
the image. In some cases the image will be rotated automatically, in other cases it will
not be rotated (e.g., when pixels would be lost after rotation). If necessary, change the
image resolution in the display control panel and restart the system after changing the
orientation.
2.2

Cable connections

To connect the cables
1. Open the connector compartment. Do this by gently pushing the two lips on top of the cover, after
which it can be removed from the display.
Image 2-4
8
:
The display must be in its highest position before it can be properly pivoted.
K5902120 CORONIS 5MP LED DISPLAY 18/01/2018