Dell EMC PowerEdge R350 Installation And Service Manual page 10

Table 3. Rear view of the system (continued)
Item Ports, panels, or slots
7 Power supply unit (PSU 1)
8 CMA jack
9 System ID button
10 USB 3.2 Gen 1 port
11 USB 2.0 port
12 iDRAC dedicated port
13 VGA port
NOTE: For more information, see the Dell EMC PowerEdge R350 Technical Specifications on the product documentation
page.
10 PowerEdge R350 system overview
Icon Description
Indicates the PSU.
Enables you to connect to cable management arm LED.
Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for more than 16
seconds.
NOTE:
● To reset iDRAC using system ID, ensure that the system ID
● If the system stops responding during POST, press and hold
The USB ports are 9-pin, 3.0-compliant. These ports enable you to
connect USB devices to the system.
The USB ports are 4-pin, 2.0-compliant. These ports enable you to
connect USB devices to the system.
Enables you to remotely access iDRAC. For more information, see
the iDRAC User's Guide at www.dell.com/poweredgemanuals.
Enables you to connect a display device to the system.
button is enabled in the iDRAC setup.
the system ID button (for more than 5 seconds) to enter
the BIOS progress mode.