Installing The Idsdm Module - Dell EMC PowerEdge R350 Installation And Service Manual

Figure 73. Removing the IDSDM module
Next steps
Replace the IDSDM module.

Installing the IDSDM module

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
Steps
1. Locate the IDSDM connector on the system board.
To locate IDSDM, see the System board jumpers and connectors section.
2. Align IDSDM module with the connector on the system board.
3. Press the IDSDM module, until firmly seated on the system board connector.
78 Installing and removing system components