Drive Backplane - Dell EMC PowerEdge R350 Installation And Service Manual

Figure 18. Installing the intrusion switch
Next steps
1. Install the air shroud.
2. Follow the procedure listed in

Drive backplane

This is a service technician replaceable part only.
Drive backplane
Depending on your system configuration, the drive backplanes supported for R350 system are listed here:
Table 11. Supported backplane options for R350 system
System
PowerEdge R350
Figure 19. 4 x 3.5-inch drive backplane
1. BP_PWR_1 (backplane power and signal cable to PIB)
2. BP_DST_SA1 (SAS/SATA connector)
3. BP_PWR_CTRL (backplane power)
32 Installing and removing system components
After working inside your system.
Supported hard drives options
3.5 inch (x4) SAS, SATA backplane
2.5 inch (x8) SAS or SATA backplane