Lubrication - ODB LCT60C Owner's Manual

NOTE; DO NOT mix different
types of grease. The old grease
MUST BE purged before a differ-
ent type of grease is used. Mix-
ing grease WILL cause premature
failure to the bearings.
ODB COMPANY
Maintenance Section

4.3 Lubrication:

Remove the negative battery terminal before at-
tempting any lubrication procedures.
Thoroughly read and understand the safety and
pre-operating sections of this manual before per-
forming any lubrication procedures.
The following are general lubrication procedures for our
standard units. Any special or custom built units may
have other lubrication procedures not directly mentioned
in this manual. Please consult ODB before any lubricat-
ing procedures not specifically mentioned in this manual.
Proper lubrication of your unit correlates directly to how
long your unit will last. A properly maintained unit will last
much longer than a unit that is not maintained properly.
NOTE: Always lubricate bearings at the end of each work
day. This will displace any moisture in the bearings. Also
lubricate thorougly before extended shutdown or storage.
Lubrication Points:
800-446-9823
38
LCT60C