Starting Engine - ODB LCT60C Owner's Manual

figure 3a
figure 3b
PTO shown disengaged
ODB COMPANY
Operating Section

3.1 Starting Engine

Always make sure the PTO is disengaged before
starting unit. (See figure 3b)
Thoroughly read and understand the safety and
pre-operating sections of this manual before star-
ing the engine.
DO NOT start the engine in an enclosed building.
Proper ventilation is required before starting the
engine.
Review the Engine Operating Manual supplied with your
leaf vacuum for specific start-up, maintenance and operat-
ing instructions. It is especially important to review break-in
service procedures for brand new units.
Starting Procedure (refer to figures 3a and 3b):
1. Perform all the pre-starting, pre-operating checks out-
lined in the EOM and in this manual.
2. Make sure the PTO is disengaged as shown in figure 3b.
3. Turn the throttle control (fig. 3a) counter-clockwise 2
revolutions.
4. Depress and hold the Murphy switch while starting.
800-446-9823
29
LCT60C