Camera Power Up - Arecont Vision Contera Micro Bullet Installation Manual

Camera Power Up

CAUTION! This product should be installed by a qualified service technician in accordance with the National
Electrical Code (NEC 800 CEC Section 60) or applicable local code. Wiring methods shall be in accordance
with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction.
Wiring should be UL Listed and/or Recognized wire suitable for the application.
1. Connect the camera to a PoE port on 100Mbps network PoE switch using an Ethernet cable.
2. Connect the PoE switch to your computer's network port using an Ethernet cable.
LED
Green Quick Flashing
Slow Flashing
None None
Contera Indoor Dome | Installation Manual
Status
Link has been established
Normal operation
No Connection
Description
8