Arecont Vision Contera Micro Bullet Installation Manual page 29

*This function is supported
depends on models.
Contera Indoor Dome | Installation Manual
Login Certificate
Recipient Setup
Network Storage Status
Network Address
Folder Name
Record Type
Mount and Remove
Network Storage
Network Storage Handler
Enable
Specifies the login Username and
network storage sever.
Network Storage Status: Displays the current status of
the connection with the network storage server.
( not_mounted or ok)
Network Address: Specifies the IP address of the
network storage server.
Folder Name: Specifies the folder name on the network
storage server.
Recoding Type: Specifies the desired action when an
event is triggered. The options are
Video.
Mount: Sets up a network connection with the network
storage server. All the video recordings or snapshots
from event triggers will be uploaded to the network
storage server. After the setting is complete, the
Network Storage Status field will display "ok".
Remove: Deletes the previous setting. After the setting
is removed, the Network Storage Status field will
display "not_mounted".
Enables and selects a desired trigger source. The
options are Trigger Alarm Detection*, Trigger Motion
Detection, Trigger Tampering Alarm, and
Scheduled.
*This function is supported depends on
Enables and selects a desired trigger source. The
options are Trigger Alarm Detection*, Trigger Motion
Detection, Trigger Tampering Alarm, and
Record.
*This function is supported depends on
Password for the
Snapshot and
Trigger
models.
Manual
models.
29