Specifications; Installation; Terminal Installation - Coban GPS105 User Manual

Gsm/gprs/gps vehicle tracker
Table of Contents

Advertisement

12

5. Specifications

Content
DIM.
Weight
Network
Band
GPS Sensitivity
GPS Accuracy
GPS Start time
Voltage of car power
system
Backup battery
Storage Temp.
Operation Temp.
Humidity

6. Installation

6.1. Terminal Installation

6.1.1 Please ask the qualified engineers to install.
6.1.2 Do not install it in an environment which is over GSM &GPS performance and fix the antennas in a position with
good signals.
6.1.3 Pay attention to make installation location preventing water and dust.
6.1.4 Knowing about the type of the door trigger is positive or negative. Please connect the green wire to the door
control circuit if it is positive, and connect blue wire if it is negative.
6.1.5 Electric lock is set default central lock. If vehicle central lock is vapor lock, refer to the following instruction to
Switch between Electric and Vapor lock.
6.1.6 Please put SOS button at the place driver can touch.
6.1.7 Connect the GPS and GSM antenna to the right connector, and find an appropriate place to fix the antennas to
make sure good reception.
Fuel sensor
specifications
92*71*26mm
120g
GSM/GPRS
850/900/1800/1900Mhz
-159dBm
5m
Cold status 45s
Warm status 35s
Hot status 1s
12 V -24V
Chargeable 3.7V500mAh Polymer Li-Battery
-40° C to +85° C
-20° C to +65° C
5%--95% non-condensing
Option

Advertisement

Table of Contents
loading

Table of Contents