Table of Contents
Advertisement
7.46. Web platform and app for mobile phones
7.46.1 Web based platform www.gpstrackerxy.com. Configuration IP: 202.104.150.75 Port: 9000. Or configure
corresponding IP according the server you choose.
7.46.2 Please check chapter 7.42 GPRS settings for more details.
7.46.3 Please check platform www.gpstrackerxy.com for more details about the app
7.47. PC tracking software
7.47.1 Please download on the web platform or find it in the CD.
8.
Cautions
Please comply with the instructions to extend the unit life:
8.1. Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry.
8.2. Don't use & store the unit in dusty places.
8.3. Don't put the unit in overheated or overcooled places.
8.4. Handle carefully. Don't vibrate or shake it violently.
8.5. Clear the unit with a piece of dry cloth. Don't clean in chemicals, detergent.
8.6. Don't paint the unit, and may cause malfunction for the circuit.
8.7. Don't disassemble or refit the unit.
8.8. Please read the user manual carefully before installation and operation, learn something more about the voltage
range. Otherwise, it won't work properly or destroy the product.
8.9. Web platform and PC installation tracking software user manual pls refer to the CD includded in the Standard
Package.
9. Faults & the Solutions
Faults
Startup Fail
No GSM Signal
No GPS Signal
SMS reply fail
Hang up Fail or alarms fail
to get
Engine Stop Fail
Central lock fail
Solution
Please check out the power wiring in correct place.
Check GSM Antenna be correct connected and correct place to put, Check whether
the SIM card in place. Make sure the SIM Card should be GSM , PIN code off and
no call transfer.
Check GPS Antenna correct connected or not and GPS antennas should put to the
place near the windows of vehicle, no covered by metal parts.
Password incorrect or wrong sms commands format
Authorized no. setting fail or no authorized no set, Please initialize the unit and
re-set up the authorized numbers.
Check the relay wire connection for engine cutting.
Check if the external cable is connected well according to Wiring diagram
.
Advertisement
Table of Contents
