Table of Contents
Advertisement
18
19
20
5. Specifications
content
DIM
weight
network
band
GPS sensitivity
GPS accuracy
GPS Start time
Applicable
vehicle power
Backup battery
Storage Temp
Operation Temp
Interface
6. Installation
6.1 Installation instructions
6.1.1 Please ask the qualified engineers to install.
6.1.2 Do not install it in an environment which is over GSM performance and please fix the antennas in an appropriate
position with good reception.
6.1.3 Make sure installation position preventing water and dust.
6.1.4 Find the harnesses in package and insert it into the corresponding holes of the products, and connect the wires to
the original car circuit as the installation diagram showing below:
6.1.5 Knowing about the type of the door trigger is positive or negative. Please connect the green wire to the door
8
LED advertising
Specifications
110*80*26mm
215g
GSM/GPRS
850/900/1800/1900Mhz
-159dBm
5m
Cold status 45s
Warm status 35s
Hot status 1s
12 V/24V
Chargeable changeable 3.7V 500mAh Li-ion battery
-40° C to +85° C
-20° C to +65° C
5%--95% non-condensing
OBDII/CAN
RFID
screen
option
option
option
Advertisement
Table of Contents
