Defining Snmp Communities - 3Com 2924-SFP User Manual

136 C 12: C
HAPTER ONFIGURING
Defining SNMP
Communities
SNMP
Access rights are managed by defining communities in the SNMP
Communities Setup Page. When the community names are changed,
access rights are also changed. SNMP communities are defined only for
SNMP v1 and SNMP v2c.
Monitor users have no access to this page.
To define SNMP communities:
1 Click Administration > SNMP > Communities > Setup. The SNMP
Communities Setup Page opens:
Figure 72 SNMP Communities Setup Page
The SNMP Communities Setup Page contains the following fields:
SNMP Status
■
values are:
Enable — Enables SNMP on the device.
■
Disable — Disables SNMP on the device.
■
Insert New Community — Adds a SNMP community.
■
Defines SNMP on the device. The possible field
—