3Com 2924-SFP User Manual page 117

Adding Entries into
Address Tables
MAC Address — Displays MAC Addresses currently listed in the MAC
■
Addresses table, filtered by the selected value of the State field.
VLAN ID — Displays the VLAN ID attached to the MAC Address.
■
State — Displays a port table display based on the type of address.
■
Possible values are:
Config Static — Indicates the MAC Address is statically configured.
■
Config Dynamic — Indicates the MAC Address is dynamically
■
configured.
Port Index — Indicates Port Table entry number.
■
Aging Time — Specifies the amount of time the MAC Address
■
remains in the Dynamic MAC Address table before it is timed out if no
traffic from the source is detected. The default value is 300 seconds.
The Address Table Add Page allows the network manager to assign MAC
addresses to ports with VLANs.
The monitor users have no access to this page.
To add Address Tables:
1 Click Monitoring > Address Tables > Add. The Address Table Add Page
opens:
Figure 64 Address Table Add Page
Configuring Address Tables 117