Viewing Spanning Tree - 3Com 2924-SFP User Manual

Viewing Spanning
Tree
The Spanning Tree Summary Page displays the current Spanning Tree
parameters for all ports.
To view Spanning Tree Summary:
1 Click Device > Spanning Tree > Summary. The Spanning Tree
Summary Page opens:
Figure 69 Spanning Tree Summary Page
The Spanning Tree Summary Page contains the following fields:
Port — The interface for which the information is displayed.
■
STP — Indicates if STP is enabled on the port. The possible field values
■
are:
STP — Indicates that STP is enabled on the port.
■
RSTP — Indicates that RSTP is enabled on the port.
■
Disable — Indicates that neither STP nor RSTP is enabled on the
■
port.
Port Fast — Indicates if Fast Link is enabled on the port. If Fast Link
■
mode is enabled for a port, the Port State is automatically placed in
the Forwarding state when the port link is up. Fast Link optimizes the
STP protocol convergence. STP convergence takes 30 seconds and is
not dependent on the number of switches in the network.

Viewing Spanning Tree

127