3Com 2924-SFP User Manual page 171

Severity level — Indicates the minimum severity level for which a
■
message will be logged. When a severity level is selected, all severity
level choices above the selection are selected automatically. The
possible field values are:
Emergency — The highest warning level. If the device is down or
■
not functioning properly, an emergency log message is saved to
the specified logging location.
Alert — The second highest warning level. An alert log is saved, if
■
there is a serious device malfunction; for example, all device
features are down.
Critical — The third highest warning level. A critical log is saved if a
■
critical device malfunction occurs; for example, two device ports
are not functioning, while the rest of the device ports remain
functional.
Error — A device error has occurred, for example, if a single port is
■
offline.
Warning — The lowest level of a device warning. The device is
■
functioning, but an operational problem has occurred.
Note — Provides device information.
■
Informational — Provides device information.
■
Debug — Provides debugging messages.
■
Syslog IP Address — Defines IP Address to upload syslog messages.
■
Syslog Port — Defines the UDP Port through which syslog messages
■
are uploaded.
2 Define the fields.
3 Click Apply. The log parameters are set, and the device is updated.
Configuring Logging 171