3Com 2924-SFP User Manual page 67

Baseline switch plus
Table of Contents

Advertisement

To configure IP Based Access Control Lists:
1 Click Device > ACL > IP Based ACL > Setup. The IP Based ACL Setup
Page opens:
Figure 33
IP Based ACL Setup Page
The IP Based ACL Setup Page contains the following fields:
Selection ACL — Selects the ACL to be bound.
Create ACL — Defines a new user-defined IP based ACL.
Add Rules to ACL
Priority — Defines the ACL priority. ACLs are checked on the first fit
basis. The ACL priority defines the ACL order in the ACL list.
Protocol — Indicates the protocol in the ACE to which the packet is
matched. The possible fields are:
Select from List — Selects a protocol on which ACE can be based.
Protocol ID — Adds user-defined protocols by which packets are
matched to the ACE. Each protocol has a specific protocol number
which is unique. The possible field range is 0-255.
Source Port — Indicates the source port that is used for matched
packets. Enabled only when TCP or UDP are selected in the Protocol
list. The field value is either user defined or Any. If Any is selected the
IP based ACL is applied to any source port.
Defining Access Control Lists
67

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2916-sfp plus3cblsg163cblsg242924-sfp plus

Table of Contents