3Com 2924-SFP User Manual page 115

Viewing Address
Table Settings
1 Click Monitoring > Address Tables > Summary. The Address Table
The Address Table Summary Page displays the current MAC address table
configuration.
To view Address Table settings:
Summary Page opens:
Figure 62 Address Table Summary Page
The Address Table Summary Page contains the following fields:
State — Filters the list of MAC Addresses displayed according to the
■
type of MAC Address configuration. Possible values are:
All — Displays all MAC Addresses.
■
Static — Displays the MAC Addresses that were entered by a user.
■
Dynamic — Displays the MAC Addresses that were detected by the
■
switch.
MAC Address — Displays the current MAC addresses listed in the
■
MAC address table, filtered by the selected value of the State field.
VLAN ID — Displays the VLAN ID attached to the MAC Address.
■
State — Displays a table display based on the type of MAC address.
■
Possible values are:
Config Static — Indicates the MAC address is statically configured.
■
Configuring Address Tables 115