3Com 2924-SFP User Manual page 51

Authentication Port — Identifies the authentication port. The
■
authentication port is used to verify the RADIUS server authentication.
The authenticated port default is 1812.
Number of Retries — Defines the number of transmitted requests
■
sent to the RADIUS server before a failure occurs. Possible field values
are 1-10. The default value is 3.
Timeout for Reply — Defines the amount of time (in seconds) the
■
device waits for an answer from the RADIUS server before retrying the
query, or switching to the next server. Possible field values are 1-30.
The default value is 3.
Dead Time — Defines the default amount of time (in minutes) that a
■
RADIUS server is bypassed for service requests. The range is 0-2000.
The default value is 0.
Key String — Defines the default key string used for authenticating
■
and encrypting all RADIUS-communications between the device and
the RADIUS server. This key must match the RADIUS encryption.
2 Define the fields.
3 Click OK. The RADIUS client is enabled, and the system is updated.
Defining RADIUS Clients 51