3Com 2924-SFP User Manual page 55

To configure 802.1X Settings:
1 Click Security > 802.1X > Setup. The 802.1X Setup Page opens:
Figure 27 802.1X Setup Page
802.1X Setup Page contains the following fields:
The
802.1X Global Settings
Port Based Authentication State — Indicates if Port Authentication
■
is enabled on the device. The possible field values are:
Enable — Enables port-based authentication on the device.
■
Disable — Disables port-based authentication on the device. This is
■
the default value.
Authentication Method — Specifies the authentication method
■
used for port authentication. The possible field values are:
RADIUS — Provides port authentication using the RADIUS server.
■
RADIUS, None — Provides port authentication, first using the
■
RADIUS server. If the port is not authenticated, then no
authentication method is used, and the session is permitted.
None — Indicates that no authentication method is used to
■
authenticate the port.
Enable Guest VLAN — Provides limited network access to authorized
■
ports. If a port is denied network access via port-based authorization,
but the Guest VLAN is enabled, the port receives limited network
Defining Port-Based Authentication (802.1X) 55