Setting Up Web
Interface
Management
This section describes how you can set up web interface management
over the network.
Prerequisites
Ensure you have already set up the switch with IP information as
■
described in "Methods of Managing a Switch" on page 17.
Ensure that the switch is connected to the network using a Category 5
■
twisted pair Ethernet cable with RJ-45 connectors.
A suitable Web browser.
■
Choosing a Browser
To display the web interface correctly, use one of the following Web
browser and platform combinations:
Table 4 Supported Web Browsers and Platforms
Browser
Internet Explorer 6
Internet Explorer 7
Firefox 1.5
Firefox 2
Netscape 8
For the browser to operate the web interface correctly, JavaScript and
Cascading Style Sheets must be enabled on your browser. These features
are enabled on a browser by default. You will only need to enable them if
you have changed your browser settings.
The switch's Web interface supports both secure (HTTPS) and non-secure
(HTTP) connections.
Setting Up Web Interface Management
Platform
Windows 2000
Windows XP
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
25
Windows Vista
Yes
Yes
Yes
Yes
Yes