3Com 2924-SFP User Manual page 201

Upgrade The Upgrade command starts a system download and thereby allowing
a system upgrade.
Syntax
upgrade [TFTP Server IP Address|Destination File Name| File Type]
Parameters
TFTP Server IP Address — Defines the TFTP server's IP address.
■
Source File Name — Specifies the source file name.
■
File Type — Defines the file type to be downloaded. The possible
■
values are:
runtime — Downloads the runtime software application file.
■
bootcode — Downloads the bootcode software file.
■
Default Configuration
This command has no default configuration.
User Guidelines
During the upgrade process, a series of dots appear representing the
upgrade process in the CLI interface. When the upgrade process is
completed, the command prompt reappears.
The Dual Software Image feature is supported therefore the next boot
after upgrade command will always use the newly downloaded image.
CLI Commands 201