Speed — Displays the configured rate for the port. The port type
■
determines what speed setting options are available. Port speeds can
only be configured when auto negotiation is disabled. The possible
field values are:
10 — Indicates the port is currently operating at 10 Mbps.
■
100 — Indicates the port is currently operating at 100 Mbps.
■
1000 — Indicates the port is currently operating at 1000 Mbps.
■
Auto — Use to automatically configure the port.
■
Duplex — Displays the port duplex mode. This field is configurable
■
only when auto negotiation is disabled, and the port speed is set to
10M or 100M. This field cannot be configured on LAGs. The possible
field values are:
Auto — Use to automatically configure the port.
■
Full — The interface supports transmission between the device and
■
its link partner in both directions simultaneously.
Half — The interface supports transmission between the device
■
and the client in only one direction at a time.
2 Define the fields.
3 Click Apply. The ports are enabled, and the device is updated.
Viewing Port Details
91