3Com 2924-SFP User Manual page 173

Baseline switch plus
Table of Contents

Advertisement

Refresh Rate — Defines the amount of time that passes before the
interface statistics are refreshed. The possible field values are:
No Refresh — Indicates that the port statistics are not refreshed.
15 Sec — Indicates that the port statistics are refreshed every 15
seconds.
30 Sec — Indicates that the port statistics are refreshed every 30
seconds.
60 Sec — Indicates that the port statistics are refreshed every 60
seconds.
Received Bytes (Octets) — Displays the number of octets received
on the interface since the device was last refreshed. This number
includes bad packets and FCS octets, but excludes framing bits.
Received Packets — Displays the number of packets received on the
interface, including bad packets, Multicast and broadcast packets,
since the device was last refreshed.
Broadcast Packets Received — Displays the number of good
broadcast packets received on the interface since the device was last
refreshed. This number does not include Multicast packets.
Multicast Packets Received — Displays the number of good
Multicast packets received on the interface since the device was last
refreshed.
CRC & Align Errors — Displays the number of CRC and Align errors
that have occurred on the interface since the device was last
refreshed.
Undersize Packets — Displays the number of undersized packets
(less than 64 octets) received on the interface since the device was last
refreshed.
Oversize Packets — Displays the number of oversized packets (over
1522 octets) received on the interface since the device was last
refreshed.
Fragments — Displays the number of fragments (packets with less
than 64 octets, excluding framing bits, but including FCS octets)
received on the interface since the device was last refreshed.
Jabbers — Displays the total number of received packets that were
longer than 1522 octets. This number excludes frame bits, but includes
FCS octets that had either a bad Frame Check Sequence (FCS) with an
integral number of octets (FCS Error) or a bad FCS with a non-integral
Viewing Port Statistics
173

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2916-sfp plus3cblsg163cblsg242924-sfp plus

Table of Contents