Recommended Grade And Viscosity - Subaru 2007 Forester Owner's Manual

A8110BE.book 19 ページ ２００６年６月２３日 金曜日 午後１時３２分
Turbo models
Check the oil level monthly.
1. Park the vehicle on a level surface and
stop the engine.
2. Pull out the dipstick, wipe it clean, and
insert it again.
1
2
B00367
1) Upper level
2) Lower level
3. Pull out the dipstick again and check
the oil level on it. If it is below the lower
level, add oil through the dipstick hole to
bring the level up to the upper level.
Be careful not to spill manual trans-
mission oil when adding it. If oil
touches the exhaust pipe, it may
cause a bad smell, smoke, and/or a
fire. If oil gets on the exhaust pipe,
be sure to wipe it off.
Maintenance and service
Recommended grade and
viscosity
Each oil manufacturer has its own base
oils and additives. Never use different
brands together.
1
Oil grade:
API classification GL-5
2
-30 -20 -10 0
B00368
-20 0 20 40
80W
75W/90
SAE viscosity No. and applicable tem-
perature
11-19
10 20 30 40
60 80 100
90
85W
B00032
11