Turn Signal Lever; Illumination Brightness Control - Subaru 2007 Forester Owner's Manual

A8110BE.book 19 ページ ２００６年６月２３日 金曜日 午後１時３２分

Turn signal lever

1
3
4
2
1) Right turn
2) Left turn
3) Lane change for right
4) Lane change for left
To activate the right turn signal, push the
turn signal lever up. To activate the left
turn signal, push the turn signal lever
down. When the turn is finished, the lever
will return automatically. If the lever does
not return after cornering, return the lever
to the neutral position by hand.
To signal a lane change, push the turn sig-
nal lever up or down slightly and hold it
during the lane change. The turn signal in-
dicator lights will flash in the direction of
the turn or lane change. The lever will re-
turn automatically to the neutral position
when you release it.
300601
Instruments and controls
Illumination brightness con-
trol
300131
When the headlight switch is in the
" " or " " position, you can ad-
just brightness of the instrument panel illu-
mination for better visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
3-19
3