Hazard Warning Flasher; Meters And Gauges; Speedometer; Odometer/Trip Meter - Subaru 2007 Forester Owner's Manual

A8110BE.book 6 ページ ２００６年６月２３日 金曜日 午後１時３２分
3-6
Instruments and controls

Hazard warning flasher

The hazard warning flasher is used to
warn other drivers when you have to park
your vehicle under emergency conditions.
The hazard warning flasher works with the
ignition switch in any position.
To turn on the hazard warning flasher,
push the hazard warning button on the in-
strument panel. To turn off the flasher,
push the button again.
NOTE
When the hazard warning flasher is on,
the turn signals do not work.

Meters and gauges

Speedometer

The speedometer shows the vehicle
speed.

Odometer/Trip meter

1
300117
2
1) Trip meter
2) Odometer
This meter displays the odometer and two
trip meters when the ignition switch is in
the "ON" position.
NOTE
Even with the ignition switch in the
"OFF" or "LOCK" position, the odome-
ter and trip meters are displayed for 10
seconds when you press the knob.
Odometer
The odometer shows the total distance
that the vehicle has been driven.
Double trip meter
1
2
1) A trip meter
2) B trip meter
300571
The trip meter shows the distance that the
vehicle has been driven since you last set
it to zero.
To change the mode indication, briefly
push the knob.
Each press of the knob changes the func-
tion alternately.
A trip meter B trip meter
To set the trip meter to zero, select the A
300572