Recommended Fluid - Subaru 2007 Forester Owner's Manual

A8110BE.book 24 ページ ２００６年６月２３日 金曜日 午後１時３２分
11-24
Maintenance and service
Avoid spilling fluid when adding it
in the tank.
Be careful not to spill power steer-
ing fluid when adding it. If power
steering fluid touches the exhaust
pipe, it may cause a bad smell,
smoke, and/or a fire. If power
steering fluid gets on the exhaust
pipe, be sure to wipe it off.
The power steering fluid expands greatly
as its temperature rises; the fluid level dif-
fers according to fluid temperature. There-
fore, the reservoir tank has two different
checking ranges for hot and cold fluids.
Check the power steering fluid level
monthly.
1. Park the vehicle on a level surface, and
stop the engine.
1
1) Specified range
2. Check the fluid level of the reservoir
tank.
When the fluid is hot after the vehicle has
been run: Check that the oil level is be-
tween "HOT MIN" and "HOT MAX" on the
surface of the reservoir tank.
When the fluid is cool before the vehicle is
run: Check that the oil level is between
"COLD MIN" and "COLD MAX" on the sur-
face of the reservoir tank.
3. If the fluid level is lower than the appli-
cable "MIN" line, add the recommended
fluid as necessary to bring the level be-
tween the "MIN" and "MAX" line.
If the fluid level is extreme low, it may indi-
cate possible leakage. Consult your SUB-
ARU dealer for an inspection.

Recommended fluid

"Dexron III" Type Automatic Transmis-
sion Fluid
1
B00376