Replacing Lost Transmitters - Subaru 2007 Forester Owner's Manual

A8110BE.book 9 ページ ２００６年６月２３日 金曜日 午後１時３２分
To replace the battery:
1. Open the transmitter case using a flat-
head screwdriver.
2. Separate the case.
3. Remove the old battery from the hold-
er.
0
1) Negative (–) side facing up
4. Replace with a new battery (Type
CR2025 or equivalent) making sure to in-
stall the new battery with the negative (–)
side facing up.
5. Reinstall the back half of the transmit-
ter case by snapping it back on.
After the battery is replaced, the trans-
mitter must be synchronized with the
keyless entry system's control unit.
Press either the " " or "
six times to synchronize the unit.

Replacing lost transmitters

200716
If you lose a transmitter or want to pur-
chase additional transmitters (up to four
can be programmed), you should re-pro-
Keys and doors
gram all of your transmitters for security
reasons. It is recommended that you have
your dealer program all of your transmit-
ters into your system.
Programming the transmitters
1
The keyless entry system is equipped with
a special code learning feature that allows
you to program new transmitter codes into
the system or to delete old ones. The sys-
tem can learn up to four unique transmitter
codes. The four transmitter codes may be
200717
the same or different.
Programming transmitter codes into
system:
" button
Bag containing transmitter
2-9
2
200718
– CONTINUED –