Cargo Area Cover (If Equipped); Using The Cover; To Remove The Cover Housing; Stowage Of The Cover - Subaru 2007 Forester Owner's Manual

A8110BE.book 13 ページ ２００６年６月２３日 金曜日 午後１時３２分
Cargo area cover (if
equipped)
The cargo area cover is provided for cov-
ering the cargo area and to protect its con-
tents from direct sunlight. This cover is de-
tachable to make room for additional car-
go.

Using the cover

To extend the cover, pull the end of the
cover out of the housing, then insert its
hooks into the catches as shown. To re-
wind it, unhook it from the catches and it
will rewind automatically. You should hold
on to the cover and guide it back into the
cover housing while it is rewinding.
Do not place anything on the ex-
tended cover. Putting excessive
weight on the extended cover can
break it and an object on the cover
could tumble forward in the event of
a sudden stop or collision. This
could cause serious injury.

To remove the cover housing

600099
1. Rewind the cover.
2. To take the cover housing off the re-
tainer, lift it out.
3. Store the cover housing in the cargo
area.
Interior equipment

Stowage of the cover

On models having a temporary spare tire,
the cargo area cover can be stowed under
the cargo floor.

To install the cover housing

To install the cover, insert both ends of the
cover housing into the retainers.
600100
6-13
6
600101