(2) Turn the headlight switch to the
following position.
– "
" position (except Australia
models)
– " " position (Australia models)
Except Australia models
Australia models
(3) Push the rear window defogger
switch to OFF.
(4) Turn the headlight switch to the off
position.
(5) Repeat steps (1) through (4) once
more, and go to next step.
(6) Release the brake pedal.
NOTE
Each step between (1) through (6) must
be operated within 4 seconds.
Maintenance and service/Engine oil
Preheating indicator light
5. Preheating indicator light will blink
approximately 5 seconds when the data
was reset successfully.
& Recommended grade and
viscosity
CAUTION
Use only engine oil with the recom-
mended grade and viscosity.
Refer to "Engine oil" F12-5.
NOTE
Engine oil viscosity (thickness) affects
fuel economy. Oils of lower viscosity
provide better fuel economy. However,
– CONTINUED –
11-21