A8110BE.book 17 ページ 2006年6月23日 金曜日 午後1時32分
Light control switch
The light switch operates only when the
ignition switch is in the "ON" position.
To prevent battery discharge result-
ing from accidentally leaving your
lights on when your vehicle is
parked, the light switch operates
only when the ignition switch is in
the "ON" position. In any other posi-
tion, the vehicle's lights will be out.
If you park your vehicle on a road-
side at night, use the hazard warn-
ing flasher to alert the other drivers.
Headlights
300127
To turn on the headlights, turn the knob on
the end of the turn signal lever.
first position:
Parking lights, instrument panel illumina-
tion, front side marker lights, tail lights and
license plate light are on.
second position:
Headlights, parking lights, instrument pan-
el illumination, front side marker lights, tail
lights, and license plate light are on.
Instruments and controls
High/low beam change (dim-
mer)
To change from low beam to high beam,
push the turn signal lever forward. When
the headlights are on high beam, the high
beam indicator light "
" on the instru-
ment panel is also on.
To switch back to low beam, pull the lever
back to the detent position.
– CONTINUED –
3-17
3
300128