Headlight Flasher; Daytime Running Light System - Subaru 2007 Forester Owner's Manual

A8110BE.book 18 ページ ２００６年６月２３日 金曜日 午後１時３２分
3-18
Instruments and controls

Headlight flasher

To flash the headlights, pull the lever to-
ward you and then release it. The high
beam will stay on for as long as you hold
the lever. The headlight flasher works
even though the lighting switch is in the
"OFF" position.
When the headlights are on high beam,
the high beam indicator light "
the instrument panel also comes on.
Do not hold the lever in the flashing
position for more than just a few
seconds.

Daytime running light system

Canada-spec. 2.5XT
The parking lights, and side marker
lights are not turned on by the day-
time running light system. The light
switch must always be turned to the
" " position when it is dark out-
side.
The low beam headlights and tail lights
300129
will automatically come on when the en-
gine has started, under the following con-
ditions:
The parking brake is fully released.
The light switch is in the "OFF" or
" " position.
The automatic transmission selector le-
ver is set at other than the "P" position.
" on
All models except Canada-spec.
2.5XT
The tail lights, parking lights, and
side marker lights are not turned on
by the daytime running light system.
The light switch must always be
turned to the " " position when
it is dark outside.
The low beam headlights will automatical-
ly come on at reduced brightness when
the engine has started, under the follow-
ing conditions:
The parking brake is fully released.
The light switch is in the "OFF" or
" " position.
The automatic transmission selector le-
ver is set at other than the "P" position.