Table of Contents
Advertisement
9)
Press qw to select [VERTICAL SCAN FREQUENCY].
f Select [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for [RESOLUTION].
f Select [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].
f Select [60Hz] or [50Hz] when anything other than following is selected for [RESOLUTION].
g [1920x1080p], [1920x1080i]
10) Press the <ENTER> button.
f The confirmation screen is displayed.
11) Press qw to select [OK], and press the <ENTER> button.
Note
f The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] of [EDID STATUS].
f The resolution and vertical scanning frequency settings may also be required on your computer or video device.
f After configuring settings, your computer or video device or the projector may be required to be turned off and on.
f A signal may not be output with the resolution and vertical scanning frequency that have been set, depending on your computer or video
device.
[DIGITAL LINK IN]
Set this item in accordance with the video signal input to the <DIGITAL LINK/LAN> terminal.
Setting [SIGNAL LEVEL] in [DIGITAL LINK IN]
1)
Press as to select [DIGITAL LINK IN].
2)
Press the <ENTER> button.
f The [DIGITAL LINK IN] screen is displayed.
3)
Press as to select [SIGNAL LEVEL].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[64-940]
[0-1023]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
f The signal level is displayed for 30 bits of input.
Setting [EDID MODE] in [DIGITAL LINK IN]
1)
Press as to select [DIGITAL LINK IN].
2)
Press the <ENTER> button.
f The [DIGITAL LINK IN] screen is displayed.
3)
Press as to select [EDID MODE].
4)
Press the <ENTER> button.
f The [DIGITAL LINK EDID MODE] screen is displayed.
5)
Press qw to switch [EDID MODE].
f The items will switch each time you press the button.
[DEFAULT]
[SCREEN FIT]
[USER]
130 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically sets the signal level.
Select this item when the signal output from the HDMI terminal of an external device (Blu‑ray disc
player, etc.) is input to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable transmitter.
Select this item when the signal output from the DVI-D terminal or HDMI terminal of an external
device (such as a computer) is input to the <DIGITAL LINK/LAN> terminal via a twisted‑pair‑cable
transmitter.
Standard setting.
Changes EDID data according to the [SCREEN FORMAT] setting.
Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID.
Advertisement
Table of Contents
