Table of Contents
Advertisement
Lens position setting page
Click [Projector control] → [Detail control] → [LENS] → [SET POSITION].
1
[Get]
Acquires the current lens position and displays the acquired
values in the lens position information field.
2
Lens position information field
Enter the lens position (vertical position, horizontal position,
focus position, and zoom position).
Note
f The zoom position is displayed in the lens position information field only in following case.
g When the standard DC motor unit installed in the Zoom Lens (Model No.: ET‑D75LE6, ET‑D75LE8, ET‑D75LE10, ET‑D75LE20,
ET‑D75LE30, ET‑D75LE40, etc.) is replaced with the stepping motor unit using the Stepping Motor Kit (Model No.: ET‑D75MKS10), or
when a projection lens with the stepping motor is attached.
Chapter 5 Operations — Web control function
1
2
3
4
3
[Back]
Returns to the [LENS] page.
4
[Apply]
Moves to the lens position displayed in the lens position
information field.
ENGLISH - 207
Advertisement
Table of Contents
