Table of Contents
Advertisement
Portrait setting and projecting forward
Menu item
[FRONT/REAR]
[FLOOR/CEILING]
Note
f In the portrait setting, the on-screen menu is displayed sideways.
To display the on-screen menu vertically, change the [OSD ROTATION] setting in the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY]
(x page 134).
f The projector has a built-in angle sensor. The attitude of the projector is automatically detected by setting [FLOOR/CEILING] to [AUTO] in
the [PROJECTOR SETUP] menu → [PROJECTION METHOD].
r Angle sensor
The range of the installation attitude that is detected by the angle sensor built-in the projector is as follows.
Chapter 2 Getting Started — Setting up
Setting value
[FRONT]
Set in accordance with the image
to project.
Floor standing installation
Floor standing installation
Projection direction
Portrait setting and projecting from the rear
(Using the translucent screen)
Menu item
[FRONT/REAR]
[FLOOR/CEILING]
30°
Ceiling mount installation
30°
Setting value
[REAR]
Set in accordance with the image
to project.
ENGLISH - 35
Advertisement
Table of Contents
