Table of Contents
Advertisement
'hrn Signal and Lane Change Indicator
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a
turn,
move the lever
a l l
the way up or down,
When
the
t u r n
is finished, the lever will return automatically.
An arrow on the instrument
panel will flash in the
direction of the turn or
lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. Thelever will return by
itself when you release it.
As
you signal
a
turn or a lane change, if the arrows don't
flash but just stay
on, a
signal bulb may
be
burned out
and other drivers
won't
see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you
signal a turn, check for burned-out bulbs and then check
the fuse (see "Fuses and Circuit Breakers" in the Indes).
A chime will sound if you leave your turn signal on for
more than 1/2 mile (0.8
k m ) .
Headlamp HigldLow Beam Changer
To change your headlamps
from low beam to high
beam, or high to low, pull
the multifunction lever all
the way toward you. Then
release it. When the high
beams are on, a. light on the
instrument panel also will
be on.
Advertisement
Table of Contents
