Table of Contents
Advertisement
When you sit in a center seating position, you have a lap
safety belt, which has no retractor. To make the belt
longer, tilt the latch plate and pull it along the belt.
To make the belt shorter, pull its free end as shown until
the belt is snug.
Buckle, position and release it the same way as the lap
part of a lap-shoulder belt. If the belt isn't long enough,
see "Safety Belt Extender" at the end of this section.
Make sure the release button on the buckle is positioned
so you would
be able to unbuckle the safety belt quickly
if you ever had to.
1-35
Advertisement
Table of Contents
