Pontiac 1996 Grand Prix Owner's Manual page 268

2.
Turn the socket
counterclockwise
one-sixth of a turn until
it feels loose.
3. Pull out the socket.
4.
Pull the bulb out of the socket.
5. Push in a new bulb.
6. Replace the socket into
the
housing and
turn
7. Replace the cover and pins.
clockwise until it snaps in place.
Front Turn Signal (4-DOor Models)
3.
4.
5.
6.
7.
8.
1.
2.
Remove
the screws
and
pull the turn signal
housing forward.
Turn the bulb socket
counterclockwise untiI
it pops loose from the
housing.
Pull out the bulb socket.
Lift the plastic locking tab on the electrical
connector and pull .the connector from the
bulb socket.
Snap the electrical connector into a new bulb socket,
Replace the bulb socket into the housing and
turn clockwise.
Replace the housing to the vehicle.
Install the screws.