Table of Contents
Advertisement
1. Pick up the latch plate and pull the belt across you.
Don't let it get twisted.
The shoulder belt may lock if you pull the belt across
you very quickly. If this happens, let the belt go back
slightly
to
unlock it. Then pull the belt across you
more slowly.
2. Push the latch plate into the buckle until it clicks.
Pull up on the latch plate to make sure it is secure.
When the shoulder belt is pulled out all the way, it will
lock. If it does, let it go back all the way and start again.
If the belt is not long enough, see "Safety Belt
Extender" at the end of this section. Make sure the
release button on the buckle is positioned so you would
be able to unbuckle the safety belt quickly if you ever
had to.
3. To make the lap part tight, pull down
OR
the buckle
end of the belt as you pull up on the shoulder part.
$
1-37
Advertisement
Table of Contents
