Table of Contents
Advertisement
Checking the Fluid Level
Park your vehcle on a level place. Keep the
0
With the parlung brake applied, place the shift lever
engine running.
in PARK (P).
lever through each gear range, pausing for about
three seconds in each range. Then, position the shift
lever in PARK (P).
With your foot on the brake pedal, move the shift
0
Let the engine run at idle for three to five minutes.
Then, without shutting off the engine, follow these steps:
3.1L L82 Engine
3.4L LQ 1 Engine
1. The transaxle fluid dipstick handle is the red loop
near the back of the engine. Pull out the dipstick and
wipe it with a clean rag or paper towel.
then pull it back out again.
2. Push it back in all the way, wait three seconds and
3.1L L82 Engine
3.4L LQ 1 Engine
3. Check both sides of the dipstick, and read the
lower level. The fluid level must be in the
cross-hatched area.
4. If the fluid level is in the acceptable range, push the
dipstick back in all the way.
Advertisement
Table of Contents
