If your vehicle ha
the wheel wrench
S '
If there is a wheel cover,
Removing the Flat Tire and Installing the
loosen the plastic nut caps
Spare Tire
with the wheel wrench.
They won't come off. Then,
using the flat end of the
wheel wrench, pry along the
edge of the cover until it
comes off.
Be
careful; the
edges may be sharp. Don't
try
to remove the cover with
your bare hands.
wheel nut caps, remove them using
1. Using the wheel wrench, loosen all the wheel nuts.
2. Turn the jack bandle clockwise to raise the jack lift
Don't remove them yet.
head a few inches.
5-26