Table of Contents
Advertisement
Cleaning Vinyl
Use
warm
water and
a clean
cloth.
Rub with a clean, damp cloth to remove dirt. You
may have to do it more ,than once.
0
Things like
tar,
asphalt and shoe polish will stain if you
don't get
them off quickly. Use a clean cloth and a GM
Vinylhather Cleaner or an equivalent product.
Cleaning Leather
Use
a
soft cloth with lukewarm water and a mild soap or
saddle soap.
0
0
0
For stubborn stains, use a GM VinylLeather Cleaner
or an
equivalent product.
Never use oils, varnishes, solvent-based or abrasive
cleaners, furniture polish or shoe polish on leather.
Soiled leather should be cleaned immediately. If
dirt is allowed to work 'into the finish, it can harm
the leather.
Cleaning the Top of the Instrument Panel
Use only mild soap'and water to clean the top surfaces
of the instrument panel. Sprays containing silicones or
waxes may cause annoying reflections in the windshield
and even make it difficult to see through the windshield
under certain conditions.
Care of Safety Belts
Keep belts
clean
and dry.
A
CAUTION.
Do not bleach or dye safety belts. If you do, it
' ,
may severely weaken them. In a crash, they
might not be able to provide adequate protection.
Clean safety belts only with mild soap and
lukewarm water.
I
Glass
Glass should
be
cleaned often.
GM
Glass Cleaner (GM
Part No. 1050427) or a liquid household glass cleaner
will remove normal tobacco smoke and dust films.
Don't use abrasive cleaners on glass, because they may
cause scratches. Avoid placing decals on the inside rear
window, since they may have to be scraped off later.
If abrasive cleaners are used on the inside of the rear
window, an electric defogger element may be damaged.
Any temporary license should not be attached across the
defogger grid.
Advertisement
Table of Contents
