Table of Contents
Advertisement
Turn the socket
counterclockwise
until it
pops
loose
from the housing.
3.
P u l l
out
the
bulb socket.
Headlamp Aiming
4.
Lift the plastic locking tab on the electrical
connector and pull the connector from the
bulb socket.
5. Snap the electrical connector into a new bulb socket.
6. Replace the bulb socket into the housing and
have a four-door Pontiac, see your dealer when your
This section only applies to two-door Pontiacs. If you
turn clockwise.
headlamp aim needs to be checked or adjusted.
7. Close the headlamp panel.
Your vehicle has the 55 x 135 mini-quad headlamp
system. These headlamps have horizontal and vertical
aim
indicators. The
aim
has been pre-set at the factory
and should need no further adjustment.
Advertisement
Table of Contents
