Table of Contents
Advertisement
/
2.
Remove the screw at
the top of the headlamp
support panel. Loosen
the two screws at the
bottom
of
the
panel.
Loosen these two screws
until they
are
out
of the
headlamp
frame, but
still
in the brackets on the
headlamp assembly.
3. Carefully lift the headlamp assembly and
support panel.
4.
Lift the plastic locking tabs on the electrical connector
and pull the connector from the headlamp socket.
0
Note which way the socket is pointing before
you disconnect it. You'll need to install the
new headlamp so the socket points in the
same direction.
5. Set the headlamp assembly on a work surface with
the lens facing you.
Advertisement
Table of Contents
