Digital I / O Control Feature Descriptions - Dalsa Piranha XL PX-HM-16K12B-00-R User Manual

Display Name Feature
Offset BlackLevel

Digital I / O Control Feature Descriptions

The camera's Digital I / O Control category is used to determine the source of the line sync
generator. The line synchronization can be internally generated by the camera or from the frame
grabber over the CLHS cable. CamExpert for the frame grabber can be used to then determine the
line sync source such as from the shaft encoder input.
Display Name
Trigger Mode Trigger Mode
44 •
Figure 14 Digital I/O Control Panel
Feature
Determines the source of trigger to the camera,
internal or external
Description
Controls the black level as an absolute physical
value. This represents a DC offset applied to the
video signal, in DN (digital number) units.
Description
Device
Version
& View
1.00
Beginner
Device
Version
& View
1.00
DFNC
Beginn
er
The Piranha XL Camera