11
Pinout of Remote Control Touch connector
As against to the Remote Control Voice, where the whole communication was send over this
cable, the Remote Control Touch only uses this cable for power.
Lumberg KV81-8 Pin
(RCTouch)
8
6
7
Table 11.1: Contacts of the angeled Lemo plug
11.1 Contacts of the Remote Control Touch connection
This drawing shows the pinout of the Remote Control Touch cable.
Figure 11.1: Pins of the angeled LEMO plug (FGH.1B.308.CLAD42) at the cable
RCTouch_UserGuide_V3.4.1.doc
Remote Control Touch / blue PiraT Re-
mote
User Guide
Lemo Pin
Bananaplug Pin
(cabel)
8
blue
7
black
2
red
Datum:14.12.2018
Seite 75 von 82
Signal
KL 15 (wake)
KL 31 (ground, -)
KL 30 (power, +)