Connecting The Rctouch / Bp Remote With A Data Logger; Configure The Network Settings - Magna Telemotive blue PiraT Remote User Manual

Remote Control Touch / blue PiraT Re-
Datum:14.12.2018
mote
Seite 23 von 82
User Guide
5.5

Connecting the RCTouch / bP Remote with a data logger

5.5.1 Configure the network settings

All Telemotive devices are configured as Automatic DHCP configuration for TSL with IP
192.168.0.233 by default:
Figure 5.9: Automatic DHCP configuration for TSL
So the Network settings have NOT to be modified!
If your environment needs other network settings. You can modify them by yourself.
You can read in the Telemotive System Client manual at (Network settings) how to set up
the network. You can find the manual in the Client under the menu item [Help].
In our example we configured the Remote Control Touch / blue PiraT Remote as DHCP-
Client and connected it with the data logger (see chapter 5.4.1.2). In the next picture you can
see the two devices in the client. The device with the IP address 192.168.0.233 is the data log-
ger, because it is set up as D0HCP-Server. In the Telemotive System Client manual (Name)
you can see how to give names for the devices. This might be helpful for better clarity.
Figure 5.10: Viewing the devices in the client
RCTouch_UserGuide_V3.4.1.doc