Table of Contents
Advertisement
4.2
Additional features by optional licenses
Additional features can be activated by purchasing and installing licenses. Licenses can be or-
dered at our sales team. You find the user guides for these additional features in the Service-
Center. Currently the following licensed features are available.
Feature
Camera Link
WLAN
GPS logging
Measurements with CCP
Measurements with XCP
MOST150 Streaming
MLBevo
Telemotive Download
Terminal
TPE
Test automatisation
Cellular network
Table 4.1: Additional features by optional licenses
RCTouch_UserGuide_V3.4.1.doc
Remote Control Touch / blue PiraT Re-
mote
User Guide
Description
video recording via video server or network cameras
supporting wireless LAN
(802.11, 802.11a, 802.11n), (802.11ac from FW 02.04.01)
tracking of GPS data (in the moment blue PiraT2 Ver. 1.x only)
CAN Calibration Protocol
Universal Measurement and Calibration Protocol
Currently the functionality for Ethernet (XCP on Ethernet) and the CAN-bus
(XCP on CAN) are available.
logging MOST150 synchronous/isochronous data
The license Connected-Gateway MLBevo enables the recording of data of
the ATOP control unit MLBevo via USB to the Telemotive data logger and
convert these data with the Telemotive System Client.
(from FW 02.03.01)
Telemotive Download Terminal allows an automatization of configured
tasks for a defined group of devices.
(from FW 02.03.01)
TPE = Telemotive Performance Extension
Increasing the logging rate for Ethernet data up to 100Mbit/s
(from FW 02.04.01)
Interface for connecting to test automation tools.
At the moment, the sending of CAN messages is supported.
(from FW 02.04.01)
Allows the logger to send status messages over cellular network.
(from FW 03.01.01)
Datum:14.12.2018
Seite 10 von 82
Advertisement
Table of Contents
