Table of Contents
Advertisement
6.3
Display
The display of the Remote Control Touch / blue PiraT Remote is similar to those of the data
loggers. An overview to their meanings is provided in the following table. You can find the view
that contains the display via the cross reference in the column "See".
Display
Bus load
DHCP mode
Error count
Device name
Device status
Device type
Memory percentage
protected
IP address
Channel name
Channel number
Configuration name
Logger name
Markerlist
Message category
Storage capacity
Subnet mask
Memory percentage
filled
Table 6.4: Displays overview
RCTouch_UserGuide_V3.4.1.doc
Remote Control Touch / blue PiraT Re-
User Guide
Meaning
indicates the degree with which the bus is busy with data transfer
can be configured under General Network settings
indicates whether the device functions as a server or a client or
whether DHCP was disabled
indicates the number of active errors (can be viewed in the bug re-
porter) when the status is ERROR or WARNING
can be configured under General Name
provides orientation in the application and is part of the trace file's file
name
see Table 6.5: Device status messages
Status - Overview
see
can be configured under General Buffer
indicates the percentage of the memory capacity that is protected
indicates the IP address of the device
can be configured under *Bus* *Bus #...* Name
provides orientation in the application and is part of the trace file's file
name
serves as index for sorting the channel lists
is obtained from the configuration in the Telemotive System Client
can be configured under General Name
indicates the name of the configuration on the device
can be configured under General Name
helps mapping logger-specific tabs
contains the markers of the set triggers sorted by index
Each marker is specified by the time (date and time) the trigger was
set. The
button is used to play the voice note.
see Table 6.2: Message categories
depends on the internal memory
Since the Remote Control Touch does not have internal memory, the
tab shows "0 GB".
indicates the subnet mask of the connected device
indicates the percentage of the memory capacity that is filled
mote
Datum:14.12.2018
Seite 49 von 82
See
6.2.2.3
6.2.3.2
6.2.1.2
6.2.1.2
6.1.1
6.2.1
6.2.1.2
6.2.1
6.2.1.2
6.2.1.1
6.2.1.2
6.2.1
6.2.1.2
6.2.2.3
6.2.2.3
6.2.1.2
6.2.3.2
6.2.2.2
6.2.3.2
6.2.1.2
6.2.1.2
6.2.1.2
Advertisement
Table of Contents
