Table of Contents
Advertisement
6.2.2 The application [Driver View] |
Management of the function keys, markers and voice notes
The application Driver View is used for setting triggers, recording voice
notes or pressing the function keys. Further functions are overviews of ex-
isting markers and hints, administration of test drives and shutdown the
TSL network.
Driver View – Function keys
6.2.2.1
The window of the tab sheet [Function keys] contains two buttons on the left and ten function
keys on the right. The function keys can be assigned "complex triggers" (see User manual for
the Telemotive System Client). The name of the complex trigger is shown as text on the key.
Figure 6.8: Tab sheet "Function keys"
Driver View – Marker list
6.2.2.2
The window of the tab sheet [Marker list] contains two buttons on the left and a list of set
markers on the right. The markers are sorted by index and indicate date and time of the setting.
A trigger that was set using the [Record] button contains a voice note. This is indicated by the
button in the marker entry.
Figure 6.9: Tab sheet "Marker list"
RCTouch_UserGuide_V3.4.1.doc
Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
[Trigger] button
Function keys [F1] to [F10]
Trigger count
[Record] button
[Trigger] button
Marker list
[Record] button
Button to the voice note
Seite 35 von 82
Advertisement
Table of Contents
